PD9260 Convertor Never Goes To 14.4V
If I am NOT on shore power, draw batteries down to 12.3 or 12.4 volts, I assumed that when I plugged back into shore power, my PD9260 would start putting out 14.4 volts, or at least something close. ...
Forum Discussion
Just received this from Progressive Dynamics:
The battery has to go lower than 12.2 for the 14.2 mode to come on.
Service Department
Progressive Dynamics
8A.M-12PM & 1PM -5PM EST
Phone 269-781-4241
FAX 269-781-8729
OK. I will give that a try and see what happens. Doesn't make good sense to me that a battery would have to be that low to get to the 14.4V charge. Perhaps there's a good reason for it. I'd sure like to know
The battery has to go lower than 12.2 for the 14.2 mode to come on.
Service Department
Progressive Dynamics
8A.M-12PM & 1PM -5PM EST
Phone 269-781-4241
FAX 269-781-8729
OK. I will give that a try and see what happens. Doesn't make good sense to me that a battery would have to be that low to get to the 14.4V charge. Perhaps there's a good reason for it. I'd sure like to know
