PD9260 Convertor Never Goes To 14.4V
If I am NOT on shore power, draw batteries down to 12.3 or 12.4 volts, I assumed that when I plugged back into shore power, my PD9260 would start putting out 14.4 volts, or at least something close. ...
Forum Discussion
I drew battery down to 12.1, started charging. Started out 13.3 then 13.6. Amps were dropping; first 51 then down to 35 still at 13.6. So apparently not enough to get to boost mode. Unplugged from shore power, all lights turned on now and will get down to 12.0 or less before trying again.
Pendant ordered and will be here Tuesday.
Pendant ordered and will be here Tuesday.
