PD9260 Convertor Never Goes To 14.4V
If I am NOT on shore power, draw batteries down to 12.3 or 12.4 volts, I assumed that when I plugged back into shore power, my PD9260 would start putting out 14.4 volts, or at least something close. ...
Forum Discussion
BFL13 wrote:
Which model is it that has a boost button on the DC fuse panel instead of using a remote gizmo? (People have mentioned the fuse panel location is hard to get at)
That is the 4600, see page 5 of the manual.
http://www.progressivedyn.com/4600_operation_guide.pdf
Also the new power centers have the wizard built in.
/PD4560-50-Amp-Power-Center-with-60-Amp-ConverterCharger
