Power converter
Hello I have a magnetek model 6345 power converter I am having problems with. Before the 12v lights would not work, but 120v was fine. I replaced the converter. Now lights work fine. However I cann...
Forum Discussion
No way in hell (I use profanity seldom on this forum)...
Should you trust a circuit breaker or connection that has glowed with heat. PERIOD!
Metals ANNEAL, coatings oxidize and high resistance is the result. This is a death wish if you decide to keep using the parts that have become incandescent.
If the rig were mine or a customer's, OUT go the breaker BOX, or the strip with the breaker tang connections get replaced and so does the breaker. The parts that glowed and what they touched get replaced.
You will note this response is minus humor or sarcasm, this subject cannot be made funny or minimized.
Should you trust a circuit breaker or connection that has glowed with heat. PERIOD!
Metals ANNEAL, coatings oxidize and high resistance is the result. This is a death wish if you decide to keep using the parts that have become incandescent.
If the rig were mine or a customer's, OUT go the breaker BOX, or the strip with the breaker tang connections get replaced and so does the breaker. The parts that glowed and what they touched get replaced.
You will note this response is minus humor or sarcasm, this subject cannot be made funny or minimized.
