Power Steps - Lippert - Grinding at Retract?
This is a new one on me - the steps now grind at full retract. Lippert Kwikee Steps I've had 'em grind at full extend before. Any suggestions on where to start on a fix? https://photos.app.goo.g...
Forum Discussion
I noticed that nice long screw you have for the step up/down connector pin,
In the past did the steps get impacted against the curb or some other object ?
When that happens the force is excerted on output gear as it trys to make the motor turn, and the gear teeth get damaged, after that it just a matter of time (use cycles) to when the damaged teeth break,
It has happen to me , it happens to many of us,
From the rock we didn't see or curb that was too high etc
In the past did the steps get impacted against the curb or some other object ?
When that happens the force is excerted on output gear as it trys to make the motor turn, and the gear teeth get damaged, after that it just a matter of time (use cycles) to when the damaged teeth break,
It has happen to me , it happens to many of us,
From the rock we didn't see or curb that was too high etc
