Powering a electric winch
My 2015 F350 diesel comes with 2 batteries, not sure how they are connected, so to connect winch to only 1 or run cable to both? Max draw about 400A.What says the gurus. Frank.
Forum Discussion
If the wench is properly mounted to the front frame there is no need to move it to rear for a rear pull.. Use snatch blocks and if the needed pull is directly the vehicle with the wench use a snatch block out to front of vehicle and thread wench cable through it and pull it under vehicle to rear for pulling. If the need pull is off to the rear side of the vehicle with the wench use a snatch off to the front side of the vehicle with the wench thread the wench cable through it to the vehicle needing to be towed at rear side. Snatch blacks are very helpful in maximizing pulling options, each snatch block used multiples the force of the pull.
My wench is very heavy constructed and weigh between 100-200 lbs. Lot of weigh to be moving around and requires lots of secure mounting. 12,000 LB. WARN WENCH
My wench is very heavy constructed and weigh between 100-200 lbs. Lot of weigh to be moving around and requires lots of secure mounting. 12,000 LB. WARN WENCH
