Powermax Boondocker Install
Hey folks, I am replacing my Attwood converter with a new Powermax Boondocker PM4B-60. I am pretty much good to go now, except for the Chassis Bonding Lug on the Boondocker. The Attwood only had wiri...
Forum Discussion
After careful consideration I decided to run a wire to the frame. I didn't want to because I knew it would be a pain, due to the way the wires were routed out of the compartment. The wires ran through the wall into the pantry cabinet and under the floor. I had to remove the bottom shelf to access where the wires ran through the floor to the frame. All done now so I should be good. Thanks for your replies.
