Progressive Dynamics 9260 possible issue
Hoping to solicit a bit of advice from the gurus here. I recently installed a PD 9260 and it seems to do a much better job charging my (2) Trojan T105 batteries. The only issue is, the converter ...
Forum Discussion
Just checked my 8 year old 9260, my batteries are fully charged.
Used a Killowatt meter.
Only thing running is my CO and LP sensors...
.3 amps/20watts...=480watts a day. So every 2 days or so a Kw is used.
So if my average KWH cost is $.12 then my monthly cost would be around $1.80... That I will not worry about.
Have to consider the 15 min of boost every 20hrs too into that equation also.
In float mode, 13.2vdc there still will be some current flow into the batteries so I consider these readings within tolerance..
Used a Killowatt meter.
Only thing running is my CO and LP sensors...
.3 amps/20watts...=480watts a day. So every 2 days or so a Kw is used.
So if my average KWH cost is $.12 then my monthly cost would be around $1.80... That I will not worry about.
Have to consider the 15 min of boost every 20hrs too into that equation also.
In float mode, 13.2vdc there still will be some current flow into the batteries so I consider these readings within tolerance..
