Hi. I have the listed 'Smart'power converter. It has the Charge Wizard and I need to figure out the Wizards Blinking light pattern meaning. There are 3 patterns, Solid on, Fast blink & Slow blink. I know the Solid on is the Boost mode. There is also a Normal & a Storage mode. Which of these 2 is the Fast Blink(constant Blinking) indicating and which is the Slow blink( one blink every 8 seconds) indicating? I know it tells me on the side of the Wizard but I can't figure which of the 2 is which. :h

sfpcservice wrote:Here you go...Hope that helps!X2The very slow blink is indicating the battery is fully charged and is in maintenance mode.

AFAIK those lights just indicate the battery voltage, not really what the charger is doing.My PD charger is attached to the batteries all the time, but not always plugged into the 120VAC and actually charging. Still, the lights are always on indicating the battery voltage.

jolooote wrote:Hi. I have the listed 'Smart'power converter. It has the Charge Wizard and I need to figure out the Wizards Blinking light pattern meaning. There are 3 patterns, Solid on, Fast blink & Slow blink. I know the Solid on is the Boost mode. There is also a Normal & a Storage mode. Which of these 2 is the Fast Blink(constant Blinking) indicating and which is the Slow blink( one blink every 8 seconds) indicating? I know it tells me on the side of the Wizard but I can't figure which of the 2 is which. :hMy dongle lists which is which. Solid = Boost Mode (~14.3 volts), Fast blink = Normal Mode (~13.6 volts) and Slow blink = Storage Mode (~13.3 volts). The manual says that Storage mode is 13.2 volts, but ours is always 13.3 volts if nothing DC is on.-Michael

Get a volt meter and you will know exactly what is going on.Wizard will confirm what you already know.

Progressive Dynamics Charge Wizard ? | Good Sam Community

14 Replies

mgirardo
Explorer
Aug 22, 2016
jolooote wrote:
Hi. I have the listed 'Smart'power converter. It has the Charge Wizard and I need to figure out the Wizards Blinking light pattern meaning. There are 3 patterns, Solid on, Fast blink & Slow blink.
I know the Solid on is the Boost mode. There is also a Normal & a Storage mode. Which of these 2 is the Fast Blink(constant Blinking) indicating and which is the Slow blink( one blink every 8 seconds) indicating? I know it tells me on the side of the Wizard but I can't figure which of the 2 is which. :h

My dongle lists which is which. Solid = Boost Mode (~14.3 volts), Fast blink = Normal Mode (~13.6 volts) and Slow blink = Storage Mode (~13.3 volts). The manual says that Storage mode is 13.2 volts, but ours is always 13.3 volts if nothing DC is on.

-Michael
brulaz
Explorer
Aug 22, 2016
AFAIK those lights just indicate the battery voltage, not really what the charger is doing.

My PD charger is attached to the batteries all the time, but not always plugged into the 120VAC and actually charging. Still, the lights are always on indicating the battery voltage.
rhagfo
Explorer III
Aug 22, 2016
sfpcservice wrote:
Here you go...

Hope that helps!

X2

The very slow blink is indicating the battery is fully charged and is in maintenance mode.
Diesel_Camper
Explorer
Aug 22, 2016
Here you go...

Hope that helps!

Forum Discussion

Progressive Dynamics Charge Wizard ?

14 Replies

About Technical Issues

Related Content

Progressive Dynamics Wizard Pendant

Progressive Dynamics converters

Progressive Dynamics charger PD4045

Installing Progressive Dynamic converter

Progressive Dynamics knockoffs