CA Traveler wrote:
Or it might be a marginal female plug.
SoundGuy wrote:
The OP is talking about the male input plug, not the female output receptacle which on an EMS-PT30C is a chassis mount, not a cable mount.
CA Traveler wrote:
And I was referring to the pedestal female plug which could be part of the problem.
As
Mr Wizard correctly noted -
Yes but that's something, he can not change, only report , it it will be loose at many places. I now have a hard wire Progressive EMS but if I were still using a portable version this is why I wouldn't hang it off the power post as intended by the manufacturer but instead run an extension cable to the post and locate the EMS either outside the camper, say under the slide where it's protected from the elements, or inside the camper, as I did with my first TRC portable EMS. That way, if any plug overheating were to occur because of worn / burnt contacts at the power post it's most likely any damage would be restricted to the extension cable's male plug which can easily be replaced.