Propane pipes and rerouting pipes project
My OEM wasted a lot of space routing pex pipe and copper lines to different appliances. (Like most OEM's do). If I were to re- route some lines I would have a lot more room. For example, under the s...
Forum Discussion
I'm a big chicken around LPG. I ran a schedule 80 line down each frame rail then stubbed appliance tees up and through the floor. Then low pressure **** valve followed by LPG flex to the appliance. I was fortunate I had a friend who worked at an LPG delivery company custom make nipple lengths on board his service truck.
I also put an 11" water column pressure gauge under the sink and by turning everything off, the length of time it takes for the gauge to hit zero tells me if I have a leak.
I also put an 11" water column pressure gauge under the sink and by turning everything off, the length of time it takes for the gauge to hit zero tells me if I have a leak.
