Proper Balance of wiring 3 12V batteries
I have read a lot here on the importance on wiring additional batteries properly (thx pianotuna). I'm looking to wire 3 12V T1275 in parallel, and looking for how other's have physically connected 3 ...
Forum Discussion
How many amps is your max draw?
Typical is less than 20 amps and will be close enough to balanced if you draw power from each end of the stack. Inverter pulling 100+ amps and recharging same you may as well get the bus bars.
Just use an on/off switch to cut off the whole stack together as needed.
Typical is less than 20 amps and will be close enough to balanced if you draw power from each end of the stack. Inverter pulling 100+ amps and recharging same you may as well get the bus bars.
Just use an on/off switch to cut off the whole stack together as needed.
