PWM controller with no float
OK, I have a Morningstar Sunsaver 20a PWM controller. It's not the current generation, which is a 3-stage unit. It's basically a 2-stage without the float stage. It delivers full amps till the targ...
Forum Discussion
I have been charging AGMs with an MS SS-10 two stage controller for about two years. Yes the Volts stay at 14.4 or 14.1 Volts depending on the jumper, plus or minus with the temp compensation. The Amps do drop to insignificant values below 100ma.
With AGMs, there is no water loss at these values due to the built in valves.
HTH;
John
With AGMs, there is no water loss at these values due to the built in valves.
HTH;
John
