PWM input voltage, Xantrex C40 test video
here is the Video link, the fluke is plugged directly into the Solar panel drop wiring before it enters the controller right above the panel input protection fuse, that i use for a disconnect just c...
Forum Discussion
yes it will, up to 60amps
but i have not hit that , and cannot get that high with my array in this configuration, full max ISC = 45.49
the most i have recorded so far is 31.12 amps
calculated full Vimp is 39.94 amps
but i have not hit that , and cannot get that high with my array in this configuration, full max ISC = 45.49
the most i have recorded so far is 31.12 amps
calculated full Vimp is 39.94 amps
