PWM input voltage, Xantrex C40 test video
here is the Video link, the fluke is plugged directly into the Solar panel drop wiring before it enters the controller right above the panel input protection fuse, that i use for a disconnect just c...
Forum Discussion
mine is an older C40
i don't know what year of mfg, it came with second group (4) of the panels i bought , i have changed the voltage set points, but i have not done any other configuration changes
i do know i looked at it earlier today, output was 23+ amps 13.98v , input was reading 15.64v sun was not optimal
i don't know what year of mfg, it came with second group (4) of the panels i bought , i have changed the voltage set points, but i have not done any other configuration changes
i do know i looked at it earlier today, output was 23+ amps 13.98v , input was reading 15.64v sun was not optimal
