PWM input voltage, Xantrex C40 test video
here is the Video link, the fluke is plugged directly into the Solar panel drop wiring before it enters the controller right above the panel input protection fuse, that i use for a disconnect just c...
Forum Discussion
1:57 PM PDT 91*F
parked in the shade, 3100w inverter generator running, for A/C
wfco output is reading 10amps
inverter use is reading 9.8 amps
solar reading
above fuse 16.55v
below fuse 16.52v
controller output 14.60v 8.59amps
voltage at batteries 14.22v
parked in the shade, 3100w inverter generator running, for A/C
wfco output is reading 10amps
inverter use is reading 9.8 amps
solar reading
above fuse 16.55v
below fuse 16.52v
controller output 14.60v 8.59amps
voltage at batteries 14.22v
