Radio control planes/copters/quadcopters

Raften wrote:
Hershey, take a good look at the screw in mount at the back of the motor where it connects to the X mount on your Visionare. Mine, almost brand new, unscrewed and the motor hung by the wires and pretty much totaled the plane.

My original motor lasted about 2 doz flights and the bearings started making a lot of noise. Contacted HH and they sent me a new motor, no charge. Since then Its been very smooth. I went to a 11x5.5 prop and increased speed and performance by a large margin. Thanks for the advice, I'll keep an eye on it.