Refer problem
Refer was working fine on gas. I connected it to ac and it worked fine. When I disconnected the ac, it did not automatically switch to gas. When I try to do it manually with the switch, the gas light ...
Forum Discussion
Thank you Rambo. Chris, I'm getting power to the refer because when I turn the switch off and then back on, the lights come on. They stay on (lights on are "auto", "ac", and "temp") until I switch it to gas and then all lights go off (including the light inside the refer). I have a 3 amp and a 5 amp fuse in the back. I'm going to replace both of them. The board is not encased in compound. Thanks for your comments. Any other ideas are appreciated!
