Reading AMPS from a solar panel
I have a 12v - 120W solar panel on my TC. This is controlled by a Morningstar Sunsaver 20 into a single group 27 wet cell battery. I have a Trimetric 2025RV battery monitor installed. As far as ...
Forum Discussion
Maybe this has already been suggested, but why not use the Morningstar Remote Meter to monitor your panels
Unless I'm missing something, I don't believe that panel will work with my controller.
Step 5
Connect one end of the RJ-11 meter cable into
the RJ-11 connector on the controller or
inverter. Route the cable from the c
ontroller or inverter to the RM-1.
No RJ11 connector on the SunSaver controllers....
