Forum Discussion
2DHoop
Sep 23, 2017Explorer II
dwightr8 wrote:dwightr8 wrote:
Took the cover off the burner and cleaned the area out with compressed air. It actually looked pretty clean before I started but blew it out anyway. When I tried to start the refer on gas I noticed the ignitor is not sparking. I adjusted it so it was a little closer to the burner but still no joy. I checked and I have 13.23v going to the board. Where do I go now?
Thanks,
Anybody?
Don't have to much experience with RV fridges but I know a bit about home furnaces. With the AC removed and it needs to work via propane, does it try and then throw a fault code when not successful? I know that there are a sequence of events that need to occur and, for instance, if the propane supply isn't delivered the sequence fails early. I would walk through the sequence and check for points of failure, if possible. A manual for your make/model might have the steps or a fault code reference matrix.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,194 PostsLatest Activity: Jan 29, 2025