Remove Water Heater Plug
Last fall I was unable to get the water heater plug out to winterize the system. I ended up just blowing out all the lines with compressed air but could still hear water bubbling in the water heater t...
Forum Discussion
Clarryhill wrote:Bumpyroad wrote:fj12ryder wrote:
Save yourself some grief and use a standard 6-point socket. As tight as that sounds like, a crow's foot isn't going to work, and a cheap one from HF will just round off the corners.
I can access my anode rod without removing the gas tube. I do have to move it to replace the heating element though.
do you have an atwood?
bumpy
If he's got an anode rod, it doesn't sound like it...
lets not mix apples and oranges here. if an atwood, impossible, if otherwise, maybe. but it is misleading to not clarify which tank you have.
bumpy
