wires wrote:
Not a N611, but I did a conversion last year on my N811 which is the same width and depth as the 611.
I went with a Whirlpool URB551WNGZ. I chose this unit because of its dimensions, low amp draw, and the fact that it had condenser coils on the back instead of coils and an fan on the bottom.
It fit in the existing opening width and depth. I removed a drawer below my old N811 to obtain the extra height and to allow the fridge to sit directly on the floor. The cabinet is flush with the old fridge cutout but the doors stick out an extra 2".
When I tore everything apart I had a few "what have I done" moments, but after everything was completed I don't think anyone would notice that it wasn't a factory install.
Looks great! Thanks for the info, very reassuring.
