Replacement Awning Fabric

Two ways to help longevity. One is to get awning protectors that slip over the closed awning when you are stationary as they cannot be on while in motion. The second is to go for a major change and install a system that has a metal cover over the awning when it is rolled up. Pricey but it will save the awning.

Thanks for the suggestions. They would work, but I just don't want to fool with an awning protective cover nor do I want to buy a new, more expensive awning set up.

Is there any type of awning fabric that lasts longer than another? Thicker, sun resistant, a magic coating, a different plastic, a different fabric reinforcement, anything? Or is 3 or 4 years survival for an awning in full sunlight as good as it gets?

If you are looking for a way out to get longer life to the vinyl awnings, I use 303 Aerospace UV protectant on the exposed part of the awing when it is rolled up. You just wipe it on, and it greatly helps extend the life. This stuff https://www.303products.com.au/product-range/universal/303-outdoor-protectant

I see you are from TX, and if your camper is stored or in the sun "all" the time, you would need to apply the 303 about every 3 months.

The UV damage is what kills that last 12" to 18" of awning up by the gutter rail.

Here in central Ohio, the standard Dometic awning left untreated, can last about 9 to 10 years before they get so crispy they start to tear off the gutter rail. We have winter here where the UV is not as bad. I went with the Awnings Smart replacement, 303'ed it since new and I am now I am beyond the 10 years and it is still going strong. I also do everything on the roof that is plastic or rubber with it, including the Dicor caulk and it makes a major difference.

There is only so many manufactures of replacement awnings. Being in TX, FL or AZ and stored or in the sun all the time is really hard on anything rubber or vinyl. I'm not sure you are going to find an awning with a life guarantee to live in that environment as sold. Covering the awning is an option, but you did not want to seem to go that route. The 303 is only 5 to 10 minutes every 3 months and may be less effort for your situation.

Hope this helps

John

get a replacement fabric from tuff tops. There awning fabric is way better than OEM fabric.

I'm getting ready to replace my 18 year old awning today. It lasted that long because I ran two strips of Eternabond along the top section.

Interesting ideas from all. Thanks.

I've used Eternabond a lot and this suggestion makes a lot of sense to me:

TurnThePage wrote:
I'm getting ready to replace my 18 year old awning today. It lasted that long because I ran two strips of Eternabond along the top section.

Anybody else tried putting Eternabond on the awning as a sun shield? Seems a brilliant idea to me.

ktmrfs wrote:
get a replacement fabric from tuff tops. There awning fabric is way better than OEM fabric.

Another source is Sailrite. Very helpful !

Get a new replacement fabric with the aluminum sheild.
They protect from the sun. I replaced one on my last trailer before
I sold it to my brother 20 years ago. Mine is gone with
no sheild ,his still is going strong.
I also have used eternabond on the tops of my
replacment slideout awnings to protect the
exposed tops when roll up and it has been working
great for 5 years now and still is working.

TurnThePage wrote:
I'm getting ready to replace my 18 year old awning today. It lasted that long because I ran two strips of Eternabond along the top section.

How wide a roll did you use? 4", 6" wide or wider? Two strips = how may inches covered?

Thanks

John

Your junk awning is vinyl. Replace it with acrylic. Acrylic has a woven appearance. The acrylic awnings on my MH are 25 years old and still going strong. My awnings are from Carefree. Yes acrylic costs more in the beginning but will pay back in the long run.

Richard