Roll Up Solar Panels / Ogre MPPT Controller
I would LOVE to get 10-12 amperes of 12 volt grade charging for my new group 31 Lifeline. But I have a motor-scooter size toad, that forces me to the roll-up kind of solar panel, and woe is me, the...
Forum Discussion
Could always cut a piece of card board to fit the contour of the roof, transfer the shape to the 2x4 and use a jig saw to cut it out. Send the screws up from inside with some sealer. Some of that high bond tape and you may not even need those.
a few of those and you would have a flat base to load on or to build onto.
a few of those and you would have a flat base to load on or to build onto.
