Routing your own furnace vents...
My trailer has in floor ducting. The most important of the three vents has never worked that well, and has gotten worse. Now the floor actually gets warm where the duct is likely leaking. I thought...
Forum Discussion
TurnThePage wrote:
I guess I'm just looking for advice or a bit of wisdom.
I'd say you're on the right track installing your own above floor ducting. Although our previous K-Z Spree had an enclosed underbelly the furnace ducting was just as you describe, above floor and through various cabinets. One winter a mouse (and perhaps his family) got into the camper and apparently wintered in 2 of the 5 lengths of ducting. I discovered this when I first started up the furnace in the spring :E but thought I could simply clean them out. Not a chance, I ended up having to replace the affected ducting with brand new - that turned out to be not a difficult task at all because it was all above floor. Had this been underfloor ducting this job would have been a nightmare as I'd have had to first remove the Coroplast to get to the ducts. :M
