Running Two 20A loads from a single breaker
I saw this advertised in the new issue of RV Business: Parallax Power ALS-20 This device functions similar to a transfer switch of sorts....the way it works it allows you to connect two 20A load...
Forum Discussion
Our Parallax 7355 has only four branch circuits. The water heater and microwave are on one 15a breaker with the wall switch that has three positions: MW, Off, WH.
The trailer owner's manual wiring diagrams (which have a 6300 instead of a 7300 like ours actually has) show that the USA version has four (optional fifth) branch breakers with the WH and MW on their own 20a breakers, while the Canadian version has four (optional fifth) branches with the MW and WH on the one 15a circuit.
The USA version has four 20a circuit breakers and one optional 15a, while the Canadian version has one 20a for the Air Cond, and three 15s and an optional extra 15
( I don't know if the USA trailers are wired with 12 wire and 15/20 receptacles for those "20a" circuits, but our "15s" have 14 wire and 15a only receptacles )
The trailer owner's manual wiring diagrams (which have a 6300 instead of a 7300 like ours actually has) show that the USA version has four (optional fifth) branch breakers with the WH and MW on their own 20a breakers, while the Canadian version has four (optional fifth) branches with the MW and WH on the one 15a circuit.
The USA version has four 20a circuit breakers and one optional 15a, while the Canadian version has one 20a for the Air Cond, and three 15s and an optional extra 15
( I don't know if the USA trailers are wired with 12 wire and 15/20 receptacles for those "20a" circuits, but our "15s" have 14 wire and 15a only receptacles )
