Samlex 24v 2kw inverter install
New 24v inverter is in and working fine. Here's the 24v side with my Outback60 solar controller wires attached. The inverter sits on top of the battery compartment. It's not secured yet so it'...
Forum Discussion
2oldman wrote:HiTech wrote:The spec I read says 12 amps. Is that what you see?
e needing 72 amps after you have moved the inverter off of 12v but it is nice to have capacity...that is a big unit.
My bad eyes again. That 1 looked like a 7. 12 amps seems just about right depending what has moved over to e 24v side.
Jim
