Samlex Inverter Power Draw Question
I just finished a Samlex pure sine wave PST 3000-12 inverter install. I ran 00/2 cables because that was recommended in the user manual. I added a Renogy 30 amp transfer switch with the charger wired ...
Forum Discussion
Not clear on the 20 amp plug needs for that MW. I have a 2000w with 15 amp plugs-ins and run the MW pulling about 125 amps no problem (four GC2s)
A 3000w inverter I have does not have 20 amp plug-ins. It has three 15s and you can do 2000 from any one of them, but to get 3000 you have to plug something else into a second receptacle.
Inverters are tricky that way. They are not all the same for how they do that either.
A 3000w inverter I have does not have 20 amp plug-ins. It has three 15s and you can do 2000 from any one of them, but to get 3000 you have to plug something else into a second receptacle.
Inverters are tricky that way. They are not all the same for how they do that either.
