Sewer \ Waste pipe repair
I hope I'm posting this in the right section, and couldn't find a previous post..... I need to repair the waste pipe on my RV. It cracked right against the last in line "T or Y" fitting, between ...
Forum Discussion
Can you post a picture of what you think you need to fix?
If you have a flat area of the pipe that needs repair you might find a coupler with the ID the same as the OD of the piece needing repair. Cut the coupler in half (end to end) and make a clam shell that will fit over the pipe needing repair. Glue and clamp this over the broken area. This may reduce some dis-assembly and might help save other fittings.
Cut in the direction of the shinny lines on this coupler then glue & clamp it around the bad section of pipe.
If you have a flat area of the pipe that needs repair you might find a coupler with the ID the same as the OD of the piece needing repair. Cut the coupler in half (end to end) and make a clam shell that will fit over the pipe needing repair. Glue and clamp this over the broken area. This may reduce some dis-assembly and might help save other fittings.
Cut in the direction of the shinny lines on this coupler then glue & clamp it around the bad section of pipe.
