Rbertalotto wrote:
Not sure there are many codes here in the mountains of New Mexico... :-)
For some unknown reason, the thread in adapter I have will not thread into the standing pipe. In fact, the thread in cap won't thread in other than a 1/2 thread. The treads in the standing pipe must be damaged.
It drains just fine as the outlet on the trailer is higher than the standing pipe. But there is a bit of water left in the drain pipe after the tanks are emptied. Need to disconnect from trailer and lift up the end and "walk the pipe" to empty it.
It did look cross-threaded to me. I thought maybe my chair had a short leg or something when I looked at it.