Slide creeps in, not out.
Earlier this year our HWH pump died and we had a Mobil Tech in Oregon replace it for us. Now the slide is creeping in about two inches. The hydraulic lines were not opened and only the pump motor ...
Forum Discussion
D.E.Bishop wrote:
Thanks to all, unfortunately we are in a somewhat remote area and I don;t want of crawl under the rig in the sand to attempt any repairs. We'll be home on Friday afternoon and I'll try Doug's suggestion and maybe replace the "o"ring in the poppet valve but I don't think that will have any effect.
Don't attempt to replace the o-ring's. There are a few not just one. When you remove the solenoid, it will shave/cut some of the O-rings. While HWH sells the O-rings, they never advise to replace them. They replace the complete solenoid under warranty. It is NOT the O-rings causing your problem. It is the needle valve that is allowing the fluid thru. Doug
