Small Anderson Power Pole Connectors 1, Mex 0
I am fighting the insertion of assembled connector conductor into plastic base, and I shouldn't have to. I am using a standard peg imprint uninsulated terminal (T&B) crimper. After assembly the termin...
Forum Discussion
I have seen it done using a standard crimper (What is it G&B I think) as it happens I have one of those, have no idea where/when I got it but I have one.
I use a West Mountain Radio ratcheting crimp tool with the special cup for Power Pole attachment, and let me tell you I've seen factory crimps that were not as nice. Never had a problem.
The biggest problem i have is getting the tab to go into the slot in the body.
page 2: make sure you have the tab right side up.
I love Power Poles, one of the great inventions of our time.
I use a West Mountain Radio ratcheting crimp tool with the special cup for Power Pole attachment, and let me tell you I've seen factory crimps that were not as nice. Never had a problem.
The biggest problem i have is getting the tab to go into the slot in the body.
page 2: make sure you have the tab right side up.
I love Power Poles, one of the great inventions of our time.
