Solar Panel Disconnected from SUN
I am planning installing 4X140W panels(parallel)flat mounted going to 15A breakers(so they can be switched off if needed) to the charge. The panel have ISC of 7.50 each times 4 equal 30. The controlle...
Forum Discussion
Another vote for just a single CB between panels and controller, that's what I did for my parallel 12V panels with PWM controller.
KJINTF
I have done quite a bit of tinkering with the MSVIEW application and my MS TS45 PWM controller. Mostly because I have a finicky inverter that doesn't like voltages above about 14.8V. Thanks for your help in getting that link set up, the key is a RS232 STRAIGHT THROUGH cable, not a null modem cable!
KJINTF
I have done quite a bit of tinkering with the MSVIEW application and my MS TS45 PWM controller. Mostly because I have a finicky inverter that doesn't like voltages above about 14.8V. Thanks for your help in getting that link set up, the key is a RS232 STRAIGHT THROUGH cable, not a null modem cable!
