Solar Panel Disconnected from SUN
I am planning installing 4X140W panels(parallel)flat mounted going to 15A breakers(so they can be switched off if needed) to the charge. The panel have ISC of 7.50 each times 4 equal 30. The controlle...
Forum Discussion
I am still adjusting my plans for my solar panel system. For now, I have settled on the Morningstar TS-45 PWM. Now looking over the Solar Cynergy 120W panel, I see that has ISC 7.5. so with 4 panels I would get a mathematical 30AMP. This panel has two blocking diodes.
During mu research I see that the Kyocera 140W panel has ISC 8.63 and I was going to us 3 so that would be 26.4 amps. This panel has 8 blocking diodes.
so what does this mean, with the Cynergy panel with two diodes I would lose more of the panel if it was shaded that you would on the on the Kyocera panel for the same around of shading? Am I understanding this right yet? Thanks Gary
During mu research I see that the Kyocera 140W panel has ISC 8.63 and I was going to us 3 so that would be 26.4 amps. This panel has 8 blocking diodes.
so what does this mean, with the Cynergy panel with two diodes I would lose more of the panel if it was shaded that you would on the on the Kyocera panel for the same around of shading? Am I understanding this right yet? Thanks Gary
