KJINTF wrote:
Posted By: NinerBikes on 11/12/13 08:32am
KJINTF wrote:
All the 8800 series I have seen have the RJ-11 "RCMS" RJ-11 connection
Most of the dozen or so 9800 series converters I have seen do not have the external connection.
Just took a look at a WF-9845 here in the shop that does NOT have the RJ-11 connection
Take a look for the RJ-11 connector - if there you can pickup the pendant and have full manual control
I have a 8955, not a 8800 or a 9800 series converter. Does an 8955 converter have a pendant?
SMK is correct saying NO it does not have one
However there are several of us here that have modified that and similar models to output a higher voltage.Requires taking it apart and soldering a new resister across an existing resister
Would you be so kind as to PM me the details? Amount of resistance, wattage of new resistor, and perhaps a picture of before and after soldering in?
Bad Boys Rape Our Young Girls But Violet Gives Willingly. 13.6V to ?
Does this cause Bulk charge to kick in at slightly higher voltage on a 50% SOC battery? at 12V? 12.1V?