Stereo/DVD WIRING

dougrainer wrote:
Your Model only has Zone A and Zone B speakers. SO, what I would do is, either designate Living Room/Bedroom as Zone 1 and Outside as Zone 2 to get true stereo separation, or Install a Speaker switch to use The Living Room and Outside on Zone 1 and connect that extra speaker switch to the Outside speakers to turn them ON and OFF. Doug

PS, It appears your RV is "wired" correctly since they did not install the correct A/B/C Stereo system. They wired it to kill the Bedroom using the balance.

Excellent idea. Thanks.

MrWizard wrote:
I would make the front and the rear
1 zone and outside the 2nd zone

The problem with this is, if someone wants to sleep, they will have the LR sound in the bedroom. Also, usually Balance kills the actual sound when on full left or right. Faders usually NEVER kill all the sound, you can still faintly hear the sound. Doug

I would make the front and the rear
1 zone and outside the 2nd zone

Mine is balance left right
Fade front rear aka bedroom
4 speaker system
No Zone selections
Alpine Automotive stereo not RV special
Afaik Fade & Balance have never been the same thing in automotive stereo

MrWizard wrote:
Shouldn't that have been on FADE,
Balance on left right
Fade for front rear/bedroom

Fade and Balance may be the same term. His model Stereo just has Balance between Left and Right. No fade.

Shouldn't that have been on FADE,
Balance on left right
Fade for front rear/bedroom

Your Model only has Zone A and Zone B speakers. SO, what I would do is, either designate Living Room/Bedroom as Zone 1 and Outside as Zone 2 to get true stereo separation, or Install a Speaker switch to use The Living Room and Outside on Zone 1 and connect that extra speaker switch to the Outside speakers to turn them ON and OFF. Doug

PS, It appears your RV is "wired" correctly since they did not install the correct A/B/C Stereo system. They wired it to kill the Bedroom using the balance.

dougrainer wrote:
Your profile states a 2021 model. MOST newer(last 10 years) Trailers that have 3 sets of speakers, the Stereo itself has "A" "B" "C" speaker control and the Balance will operate on all 3 sets. Some of these Stereo's it is difficult to figure out HOW to engage the 3 speaker switches. BUT, If doing the balance kills 1 set, then it is probably miswired. It is common for the factory installers to miswire the speaker leads. I would take it b ack to the dealer and have THEM fix the wiring problem. POST the Brand and Model of the Stereo for us to give you more help. Doug

It’s the Furrion DV 3100, I pulled it to take a look at the wiring. The wires coming from the unit are easily identified since I have the wiring diagram.

I’d take it to the dealers but they are so far behind. I’m using the rig almost every week.

I’m pretty good with stereos so I’m gonna give it a shot myself.

Messsing up connections is kind of a national passtime I think

On my RV as I recall the DVD did not play properly on the main TV.
They hooked the VIDEO lead to the wrong jack.

Of all the trailers I have had, not one had the speakers wired right!:E

The speakers would be cross wired to different zones. They would be wired out of phase and in one case, wires to no-where. I would carefully mark all wires and start from scratch to send them to the right speakers.