Old-Biscuit wrote:
Stove top burners typically don't use a thermocouple (ovens due because of thermostat)
Stove top burners have a on/off control......feeds a burner tube to the burner.
At burner is a diffuser ring and spark ignitor (piezo or electronic)
Lift up burner top...check for obstructions in burner tube, diffuser ring.
Also check for flow of propane---right at on/off control and where tube connect is orifice. It could be clogged or tube is not properly connected-------propane should flow down center of tube.
You missed the part where he stated he has to PUSH the knob in to start the flow of LP. He also stated that just one of TWO burners has this problem. That points to the 2 burner range model that you have a Thermocoupler for each burner and the Thermocoupler is either loose or defective for that bad burner. Doug