Forum Discussion
Old-Biscuit
Feb 12, 2014Explorer III
Not all have 3 tries/lock out system.
Need to clean the gas orifice (remove it and clean with alcohol) clean out burner tube and check spark electrode position.
Spark electrode to ground rod gap 1/8" and positioned IN main flame.
The burner tube needs to be 'straight' (in direct alignment with gas valve so gas flows down the center of tube----adjust if needed by repositioning gas valve)
Open outside compartment and watch operation while somebody turns it ON
Is spark strong?
When main flame lights......is it strong blue flame?
Is spark electrode engulfed in main flame?
Need to clean the gas orifice (remove it and clean with alcohol) clean out burner tube and check spark electrode position.
Spark electrode to ground rod gap 1/8" and positioned IN main flame.
The burner tube needs to be 'straight' (in direct alignment with gas valve so gas flows down the center of tube----adjust if needed by repositioning gas valve)
Open outside compartment and watch operation while somebody turns it ON
Is spark strong?
When main flame lights......is it strong blue flame?
Is spark electrode engulfed in main flame?
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,369 PostsLatest Activity: Mar 11, 2026