Bypassing the ems won't raise the voltage up to a safe level.
Flyfasteddie wrote:
pianotuna wrote:
I'm currently plugged into a good 15 amp shore power. However the cord to reach it is 100 feet of #12 wire.
No load voltage is 115.
Load with air conditioner dips to 94 then rises to 102. The air conditioner does have a Microair easy start kit.
So, if I had only an EMS that disconnected on low voltage, I'd not be able to use the air conditioner.
Actually, the PI hardwire units have a bypass switch on the digital readout inside the rig. Flip the switch and it's like the EMS isn't there.