Switch panel vs campervan's 12V DC system
Hi everyone, I'm working on my very first DIY camper conversion, using a 2010 extended Ford E250. I've added some 27W LED lights : 4 top front, 27W x 4 = 108W/12V = 9AMP 2 lower front, 2...
Forum Discussion
westend wrote:
Fusing each circuit is much more elegant as a short of one device won't effect the others. The price is not that much greater. You could even install a small fuse block for ease of connection. The main feed to the switch panel will also require a fuse or circuit breaker close to the battery.
But doesn't that switch panel in the picture already have all the fuses for each circuit?
B.T.W. thanks for the offer ;-)
