Switch panel vs campervan's 12V DC system
Hi everyone, I'm working on my very first DIY camper conversion, using a 2010 extended Ford E250. I've added some 27W LED lights : 4 top front, 27W x 4 = 108W/12V = 9AMP 2 lower front, 2...
Forum Discussion
So those are off-road lights.
25 or more amps going via add-on switch brings several concerns.
The proper way would be use relays and short wires straight from fuse box to the lights and use the panel for low amp controls only.
25 or more amps going via add-on switch brings several concerns.
The proper way would be use relays and short wires straight from fuse box to the lights and use the panel for low amp controls only.
