T-105s - Will they fit?
After reading all the comments to my last battery related post, I am leaning towards replacing the single group 27 12V of unknown vintage. I would like to go with 2 6v T-105s, but I am not certain if ...
Forum Discussion
RoyB wrote:
Some trailers have the pull out battery tray. If this is what you have perhaps you can remove the tray...
If it is going to be real close be sure to come up a way to make sure the batteries don't bounce up and short out the terminals on the top of the compartment...
Roy Ken
No, the tray is 2 pieces of angle iron welded to the A frame behind the hitch and propane tanks. No adjustment available without some real work. It is hard up against the trailer which angles up and toward the front. I would use hold down straps to keep them from bouncing. I think the twin group 24s is the answer.
