Tailgater Problem
I modified the my TV antenna amplifier plate to work with Dish receiver. Connected coax from dish on tripod, worked good after I finally got it aimed, but a real hassle aiming dish after every move. D...
Forum Discussion
martipr wrote:GoPackGo wrote:
This is a common situation with all the 'golfball' sat antennas that get their power thru the cable from your inside receiver box. I have a Winegard Pathway X2 and it's the same situation. Nothing is really 'wrong'. You just need one cable going directly from the sat antenna to the receiver box. You can try reworking your current interior cables to try and get rid of any splitters, but many just run a new cable.
Tim
My real question was how do you run one cable from the sat antenna to the receiver without going through an open door or window?
If you have a good connector that goes through the trailer and cable that goes straight to the receiver it will work without any problems. The only time in the last 3 years I went through the Window was to diagnose my bad connector were it entered the trailer.
Denny
