The Muffin Fan! The Muffin Fan!
Pathetic. I don't even know the right way to measure the mm size. Along the straight square edges the fan measures 60 mm square end-to-end all four sides on the Megawatt fan. The label on the fan c...
Forum Discussion
Going to straight-edge across the top of the case, caliper some depth clearance measurements and take images of caliper readings. Apparently NinerBikes is busy and could not post images of the Megawatt 400 internals - yet.
But the straight edge measurement images will allow folks to see and know case depth clearance. I can only sigh and hope someone thinks the effort is worth a sticky. Download and save to drive as a reference if you wish. I don't know when Niner can post images but I will share this with you - sending the images is costing me more than thirty dollars in international telephone rates.
But the straight edge measurement images will allow folks to see and know case depth clearance. I can only sigh and hope someone thinks the effort is worth a sticky. Download and save to drive as a reference if you wish. I don't know when Niner can post images but I will share this with you - sending the images is costing me more than thirty dollars in international telephone rates.
