Tiffin Schwintek motor removal
Have a 2013 Tiffin 30GA with Schwintek slide issues - again. To manually retract the slide instructions call for removing one retainer screw and lifting the motor. Sounds easy until one tries to acces...
Forum Discussion
On my rig (which is only a couple of years older than yours) Schwintek had not yet started putting the slot in the rails to remove the motors. I had to remove two motors over the years because of broken wires. I could have detached the entire slide(s) and pushed them out to remove the motors, but I cut the frames thereby duplicating the later Schwintek slides.
