time to replace brakes?
These are Dexter self-adjust that I have dragged 15,500 miles. At zero miles (i.e., new) the pads are 0.18 inch (9/32) and after 15,500 they are 0.08 inch (1/8). So I am figuring that the pads are l...
Forum Discussion
bobsallyh wrote:
If you decide to change them out, just get the whole enchilada. Backing plate, magnet etc. They all come together, no springs etc. to screw with. Cut the brake wires, remove the bolts holding the backing plate and just put the new unit on. Check etrailer or another parts house.
I think that's what he was talking about doing.. I just priced what mine cost me when I got my backing plates for my old Prowler. Dexter 10" #3500 axle was $40 each back in 2011 at etrailer.
Today, the same units are $84 each...
So, his $185/pair isn't too far off, as he must have a larger setup.
Well, I just checked the pricing for my 2019 Rockwood Mini Lite.. They want $241 for the pair (left) and $241 for the pair (right).. Oh my! These are the Dexter self adjusting ones.. Maybe I can just get the shoes and just change those when the time comes. I know I'll probably have to do the magnet too, but dang! $$$$$
But, when a dozen eggs now costs over $3/dozen at Walmart I guess it's all in perspective.. :(
Mitch
