Tough day. Pulled the tank. Removed all the lines. Pulled it out from under the RV. Soaked the Fuel Pump bolts with Kroil. Waited a couple hours. Tapped on them a bit to loosen. Then proceeded to snap all 6 off with maybe 10lbs of torque. Two were almost completely rusted through as you see in the image. So ... time to clean all that up and drill/tap those bolt heads (which are welded on the inside). Three of them I almost off until the metal fatigued and failed. Two steps forward, one step back.
Click For Full-Size Image.
Click For Full-Size Image.
