Trailer Brake issues
A few months ago, I had to slam on the breaks while towing a trailer (2016 Jayco Jayflight 27BHS) to avoid an accident. While everything checked out okay, my tow vehicle (2011 Dodge Ram 5.7L) now says...
Forum Discussion
Thanks for the quick response. I'll answer questions that i've seen:
Westend, I followed the brake wire until I saw a fuse that was in a protective casing. Where before the trailers brakes said they were disconnect, after the fuse change the dodge said everything was fine. When I drove off, it started cycling between connected, not connected.
The brakes are engaging if i apply pressure and the system indicates they are on.
Tom/Barb, how do i reset the emergency brake away switch? i usually don't keep the trailer connected to the battery when i drive, as i usually go straight from our storage lot to camping grounds and hook up to local power. If it's a mistake or it will help, please let me know.
Doug, yes it does have the sway command, but I have a Pro-Pride 3P hitch so i don't use it.
Thanks again everyone
r/
Phil
Westend, I followed the brake wire until I saw a fuse that was in a protective casing. Where before the trailers brakes said they were disconnect, after the fuse change the dodge said everything was fine. When I drove off, it started cycling between connected, not connected.
The brakes are engaging if i apply pressure and the system indicates they are on.
Tom/Barb, how do i reset the emergency brake away switch? i usually don't keep the trailer connected to the battery when i drive, as i usually go straight from our storage lot to camping grounds and hook up to local power. If it's a mistake or it will help, please let me know.
Doug, yes it does have the sway command, but I have a Pro-Pride 3P hitch so i don't use it.
Thanks again everyone
r/
Phil
