Trimetric 2025 RV
This monitor requires either a 100 or 500 amp shunt. I cannot find any help on which one to choose. I am building a 560 watt solar system and have 2 pairs or Trojan T105's with 450 amp hours if that helps.
Forum Discussion
4 Replies
- I too had a few questions when installing the 2025rv
So picked up both the 100amp and the 500amp shunts
Tried them both - depending on your system loads you might be forced to the 500amp shunt. The 100amp has a bit better resolution but not enough to stress over. I settled on the 500amp for the rigs 2025 installation and used the 100amp shunt on another install. - Hi,
If you have not purchased yet, get the Victron monitor instead. It is cheaper and more fully featured than the Trimetric. - The 500A shunt has a 50mv drop white the 100A has a 100mv drop. Use the 500A shunt.
Also depending upon what loads are on your battery you could exceed 100A. - It should have come with one
http://www.bogartengineering.com has a list of dealers if all else fails
This is what you are looking for http://www.altestore.com/store/Meters-Communications-Site-Analysis/Shunts/500A-50mV-DC-Shunt-for-Current-Monitoring-Meters/p4638/
