12th or BFL13-
Quote from manual:
"The “battery % full” reading of the TriMetric just puts the “amp hours from full” number in a different form, which depends on the “amp hours “Capacity” number that has been programmed in to the TriMetric in program number P3. When the battery is full and the “amp hours from full” value is 0 then the Battery% full will be 100. When the battery is depleted so that the “amp hours from full” goes to a negative value equal to the “capacity” programmed in P3 then the Battery% full goes to zero."
I understand the %full goes to zero and stays there. However, my question was whether or not the "AH from full" stops or continues its tally independent of the %full at zero. If it does continue, then all is sweet for the knowledgeable user and SOC can be estimated.
Otherwise, I'll need to remind (re-train) DW each trip that 1/2 full is very close to empty. She does deserve more credit than I give her but BTDT.